How do I open the new WaterGuru TEST kit envelope?

WaterGuru recently made changes to the WaterGuru TEST kit envelope.

Below are the instructions on how to open and use the WaterGuru TEST kit envelope!  Take care to follow the instructions exactly as outlined. 

1. Locate the 2 perforations on the on the envelope.  There is a lower perforation and an upper perforation.
2. At the lower perforation nearest the product label, carefully tear to open the envelope
3. At the upper perforation, tear and dispose of the small piece of the envelope
4. Remove the contents, Water Sample vial and Return shipment label (Note: The Return shipment label is flush with the interior of the envelope)
5. Remove the adhesive strip from the back of the Return shipment label
6. Turn the envelope over and apply the Return shipment label to the white side of the envelope
7. Dip the Water Sample vial as far below the water surface as possible and completely fill it to the top with pool water
8. Close the vial cap firmly and ensure that no air is trapped in the vial
9. Launch the WaterGuru app
10. Ensure that your pool name is at the top of the screen. If you have multiple pools, select your pool name
11. From the Home Screen tap "TEST"
12. Tap "WaterGuru TEST kit"
13. When prompted tap "Already Have one"
14. Tap "Scan Code" and "QR code scanned successfully" will appear
15. Tap "Finish". "Your TEST registration is complete" will appear
16. Enter your Full Name on the envelope and place the vial into the envelope
17. Remove the adhesive strip at the top of the envelope and seal the envelope
18. Drop the envelope in any US Postal Service Mailbox