How do I change my SENSE water measurement time?

When the SENSE is first installed, a 36-hour pump scan is performed to sense the time when your pump is normally running.  Based on the results of the pump scan, an appropriate water measurement time will be chosen and the measurement time will appear WaterGuru app.

Note:  If you live in an area of the country where Daylight Savings Time is in effect, you may need to update your measurement time in the Spring and in the Fall

Here's how to change your measurement time:

Android

1. Launch the WaterGuru app
2. Tap the gear icon Settings in the upper right-hand corner
3. Select Measurement Time
4. Tap the time indicator, i.e. 1:00pm underneath "Set daily measure time"
5. Tap the clock
6. Use your finger to turn the clock dial
7. Select the measurement time by choosing the desired hour and minute setting
8. When the desired time appears, tap AM or PM
9. Tap OK when the time appears correctly
10. 
11. Tap Save
12. "Measure Time Updated - Measure time has been updated successfully.  It will take up to one hour for the results to be reflected on your WaterGuru device.  To have the WaterGuru device select a measure time automatically for you, select the "Rescan Pump" button."
13. Tap OK

iPhone

1. Launch the WaterGuru app
2. Tap the gear icon Settings in the upper right-hand corner
3. Select Set Measurement Time
4. Tap the time indicator, i.e. 1:00pm underneath "Set daily measure time"
5. Tap the clock
6. Use your finger to revolve the clock dial
7. Select the measurement time by choosing the desired hour and minute setting
8. When the desired time appears, select AM or PM
9. Tap OK when the time appears correctly
10. 
11. Scroll down and tap Save
12. "Measure Time Updated - Measure time has been updated successfully.  It will take up to one hour for the results to be reflected on your WaterGuru device.  To have the WaterGuru device select a measure time automatically for you, select the "Rescan Pump" button."
13. Tap OK

Note:  If you do not want to select the time but rather you want the system to automatically choose the best time, tap "Rescan Pump".  The Pump Scan will begin and results will take 24-36 hours to complete.  You can check back later to see the progress of the pump scan and view the results.

• 
• Android Clock
• 
• iPhone Clock
• 
•