How do I open the WaterGuru SENSE?
Follow these steps to open the WaterGuru SENSE. Refer to the Video below!
Note: For instructions on how to close the WaterGuru SENSE click here
New device: (see the video below)
- Place the unit on a flat surface, logo side up
- Using both hands, firmly press down on both sides of the outer ring. Note: It does take a very firm downward press to break the vacuum seal to separate the outer ring.
- The outer ring will disengage from the inner part of the unit, revealing the waterproof battery compartment.
Installed device: (see the video below)
- Remove SENSE from your skimmer.
- Wipe away all the moisture with a cloth. It’s important to keep moisture out of the battery compartment to avoid corrosion.
- Place the unit on a dry towel on a flat surface, logo side up
- Using both hands, firmly press down on the sides of the outer ring
- Note: It does take a very firm downward press to break the vacuum seal to separate the outer ring.
- The outer ring will disengage from the inner part of the unit, revealing the waterproof battery compartment.
Comments
0 comments
Article is closed for comments.