How do I close the WaterGuru SENSE?

Follow these steps to close the WaterGuru SENSE.  See the Open / Close video below!

1. Place the unit on a flat surface, logo side up
2. Position your hands on either side of the outer ring, with the four fingers of each hand underneath the outer ring and the thumbs of each hand on top of the SENSE cover.
3. While pressing down with your thumbs, use the fingers of both hands to lift up the outer ring so it is flush with the SENSE cover.
4. If there is a small gap between the outer ring and the cover, re-position your fingers to lift up the side of the outer ring that is not aligned.