How do I adjust the length of the cable attached to the WaterGuru SENSE S3 cassette holder?
On the bottom of the WaterGuru SENSE S3 there is a 2-screw mechanism designed to permit raising or lowering the height of the cable which will either raise or lower the cassette holder in your skimmer.
How to raise the height of the cassette holder in the skimmer
- Turn both screws to the left to loosen the cable - Do NOT remove the screws
- Pull the cable to Increase the size of the loop enough to decrease the length of the cable and raise the cassette holder in the skimmer so that it is not touching the bottom of your skimmer
- Ensure that the flow sensor (metal rectangle) on the side of the cassette holder is facing towards the pool and not towards the back of the skimmer
- Turn both screws to the right to tighten the cable
How to lower the height of the cassette holder in the skimmer
- Turn both screws to the left to loosen the cable - Do NOT remove the screws
- Loosen the cable to decrease the size of the loop enough to increase the length of the cable and lower the cassette holder in the skimmer so that it is not touching the bottom of your skimmer
- Ensure that the flow sensor (metal rectangle) on the side of the cassette holder is facing towards the pool and not towards the back of the skimmer
- Turn both screws to the right to tighten the cable
Comments
0 comments
Article is closed for comments.