Multiple Measurement Times - WaterGuru SENSE S2

For the use of customers with commercial pools, the WaterGuru App will support Multiple Measurement Times for the WaterGuru SENSE S2 with the latest software version v6.3.2

• Note:  Multiple Measurement Times should only be used by Commercial Customers using WaterGuru SENSE S2 devices in pools or hot tubs who are required to measure water chemistry values multiple times / day. 
• Additional Daily measurements will shorten the lifespan of the SENSE S2 cassettes.
• This feature should not be used by residential pool or hot tub owners. 

Which WaterGuru SENSE models support multiple daily measurements?

Only the WaterGuru SENSE S2 supports multiple daily measurements, using either the C5 or C2 cassettes

How many daily water measurement times can I add?

You can add up to 8 daily water measurement times  

After I add additional water measurement times, how long does it take for the new water measurement times to be activated for my WaterGuru SENSE?

• Every 30 minutes when the WaterGuru SENSE checks your water temperature, the WaterGuru App will check if you have added additional water measurement times and send the information to the Cloud. 
• Depending on what time you add the additional measurement times in the app it may take up to an hour for the information to be published to the cloud.

How do I add additional daily measurement times?

1. Launch the WaterGuru App
2. Your configured SENSE Pools and hot tubs are displayed at the top middle of the screen with a drop-down arrow.  Tap the drop-down arrow to select the SENSE S2 you wish to configure.  If you have only one SENSE device, it will be displayed at the top without a drop-down arrow.
3. Tap the Gear icon (Settings)
4. Tap Measurement Time.  Your default Daily Measurement Time will be displayed.
5. Tap "+Advanced"
6. "For advanced purposes (commercial pools, etc.) you can set up to 8 measure times a day. Note that every additional measurement shortens cassette lifetime proportionally" is displayed
7. Tap "Add"
8. A clock icon a measurement time of 12:00AM will be displayed
9. Tap on the measurement time to change it.
10. A clock will be displayed showing Hours, Minutes and AM/PM
11. Tap on each section, Hours, Minutes and AM/PM to change it to the desired time
12. Once the displayed time, i.e. 4:15PM matches your desired measurement time, tap OK
13. Tap Save
14. "Measurement Time Updated - Measure time has been updated successfully.  It will take up to one hour for the results to be reflected on your WaterGuru device.  To have the WaterGuru device select a measure time automatically for you, select the Rescan Pump button" will be displayed.
15. Tap OK
16. If you wish to add additional daily water measurement times, repeat the process by tapping Add and repeating the above steps.
17. To remove additional Water Measurement times, just tap "Remove" next to the water time and then tap "Save".