How do I manually enter Water Chemistry TEST Results into the WaterGuru App?

Follow the instructions below to manually enter water chemistry TEST results from your pool store, test strips or from a Taylor K2006 Test kit (recommended) into the WaterGuru app:

1. Launch the WaterGuru app
2. Tap the Center screen that shows FC and pH
3. Scroll to the right past Chemistry Ranges until you get to TEST Results
4. Tap the heading TEST Results
5. At the Pool Health screen you will see the following notification: "You can use WaterGuru TEST kit to test your water in our lab.  You can also use Taylor K2006 Test kit to test your water on site yourself or test in your local pool store."
6. Tap - Enter measured results
7. Scroll down to enter all chemical values.
8. When complete, tap Save & Continue