How do I change my SENSE water measurement time?

When the SENSE is first installed, a 36-hour pump scan is performed to sense the time when your pump is normally running.  Based on the results of the pump scan, an appropriate water measurement time will be chosen and the measurement time will appear WaterGuru app.

If you want to change the water measurement time, do the following:

1. Launch the WaterGuru app
2. Tap the gear icon Settings in the upper right-hand corner
3. Select Set Measurement Time
4. Tap the time indicator, i.e. 1:00pm underneath "Set daily measure time"
5. Tap the clock and select a new daily water measurement time
6. Tap OK

Note:  If you do not want to select the time but rather you want the system to automatically choose the best time, tap "Rescan Pump".  The Pump Scan will begin and results will take 24-36 hours to complete.  You can check back later to see the progress of the pump scan and view the results.